Table of Contents
Advertisement
+S$29
Bit mapped options
Binary code:
Oxxx x0xx Default:
10 hex
Bit 1,0 | Line flow control
00] (\GO) | Disabied
(See \G-command)
01)
(\G1) | Bi-directional flow control
10] (\G2) | Unidirectional flow contro!
Bit 2
|Not used
0
Bit 5, | Local flow control
000] (\Q0) | Disabled
4,3
|(See \Q-command)
001}
(\Q1) | Bi-directional XON/XOFF
010] (\Q2) | CTS control
011)
(a3)
|RTS/CTS control
100] (\Q4) | Unidirectional XON/XOFF
Bit6 | Transparent
0} (\X0) | Disabled
XON/XOFF
1 ] (\X4) | Enabled
(See \X-command)
Bit7
| Not used
0
+S30
MNP failback character
Default: 013 ASCII
Range: 0-127
This register specifies the character which when received,
causes a MNP fallback. This function is only enabled when the
modem is configured to auto MNP mode (\N3) and is in answer
mode. If the modem receives the MNP fallback character from
the remote modem during the link negotiation, it will immediately
switch to normal mode and pass the received character to DTE.
This function reduces the connect time if the originating modem
is in normal mode and the answering modem is in auto MNP
mode.
+830 =0
Auto MNP faltback Inactive
+$30=1 to 127
Defines auto MNP fallback character,
function active
+S$30=128 to 255
Iltegal value
Related command: \C
4-26
LZTR104006 R1.00
Zat 14.4/14.4-7 and 19.2/19.2-7
Advertisement
Table of Contents
