Table of Contents
Advertisement
Keys are stored into a table located in «non volatile memory». If
there is no more space left for new entries, the next key may be
entered over an existing index or you may increase the size of
the table. The modem displays:
NO MORE SPACE AVAILABLE
Read more about increasing the key table in the section about
+PL command.
Default value for the key table is 5 keys. Increasing this size
affects the password table. The maximum number of keys is
dependent of the individual requirements.
+PL —_ Enter/ display the total size of the key table
Command:
+PL?
] Displays the total number of possible keys.
Enter the size of the key table to xxx.
<=3-J Range:
002-100.
"When reducing the size of the key table, existing keys
may be deleted.
+PN
Command
mode on/off
Commands:
+PNO, +PN1
"4 Command mode on
A 1
Command mode off.
To store a certain parameter in user profile, select «Command
mode off». It is possible to recall this parameter after a power up.
jrPNi is stored in the userdefined memory.
Note!
If the modem is setup in Dumb mode you will
have to go into the SETUP menu at the front of the
modem to get it back to command mode (AT
or V.25 bis).
Anyway, or you may also get it back to command mode
from remote side by the command +PNO.
ee
" Non volatile memory. The contents will remain afler a power down
LZTR104006 R1.00
3-41
Zat
14.4/14.4-7 and Zat 19.2/19.2-7
Advertisement
Table of Contents
