Ericsson ZAT 19.2 Operation Manual page 63

\K Break handling
Commands: \KO, \K1,\K2 \K3,\K4, \K5
This commands specifies how the modem shall handle a break
signal.
In protocol mode break is not sent as data, but as link
information. It is the modem that sends a break signal that
determines how the break should be interpreted at the remote
modem.
The following table describes the break handling in data mode
for different \K commands and normal/protocol mode:
Connect | : No : NMANP ooops 3 eo Dare: Nonna
\KO Destructive Destructive Enter Enter Prioritised | Destructive
Expedited | Expedited {Command |Command | Enter Expedited
mode mode Command
mode
\K1 Destructive Destructive Destructive ) Destructive | Expedited | Destructive
Expedited | Expedited |Expedited | Expedited Expediled
\K2 Non- Non- ; Enter Enter Expedited | Non-
destructive | desiructive |Command |Command = | Enler destructive
Expediled Expediled mode mode Command | Expedited
mode
\K3 Non- Non- Non- Non- Expedited | Non-
deslruclive | destructive |destruclive | destructive destructive
Expedited | Expedited | Expedited | Expedited Expedited
\K4 Non- Non- ; Enter Enter Expediled | Non-
destructive | destructive |Command |Command_ | Enter destructive
Expediled | Expedited {mode mode Command | Expedited
mode
\K5 Non- / Non- ; Non- ; Non- Expedited | Non-
destructive | destructive | destructive | destructive destructive
Expediled | Buffered Expedited _| Buffered Expedited
Expedited:
The modem sends break immediately, even if other data
is ready to be transmitted.
Destructive:
Break is sent immediately and any characters in the
buffer is deleted.
Buffered:
The modem sends break in sequence with the data
which is ready to be transmitted.
Local \Kn determines local break handling.
LZTR104006 R1.00 3-25
Zat 14.4/14.4-7 and Zat 19.2/19.2-7