Table of Contents
Advertisement
+O Remote command access
Commands:
+00, +01, +02, +03
Remote command access disabled
"| Remote command access enabled.
No password is required.
' | Remote commands enabled.
The modem
| demands a password with level 1 or higher to
... 2
[give access.
1 As for +02, but will also enable remote
unlocking of the modem.
(+518)
"Read more about remote commands in chapter 12.
+PA
Set Password Security level!
Commands: +PA0, +PA1, +PA2, +PA3
| No security on password commands.
Level 2 password required for password
'|command access. Password commands may
be accessed from both local and remote
modem
| Level 2 password required for password
command access. No remote control of
password commands enabled.
Local password commands must be confirmed
| by pressing the ROLLIEXEC
switch.
No
«remote control of password commands
-'Tenabled.
"Read more about password function in chapter 6.
Advertisement
Table of Contents
