Table of Contents
Advertisement
2.7
Connection
Established
The modem should now ring the required number. You will hear this
in the loudspeaker. The remote receiver is now «lifted». You hear the
peeping and that the modem connects. The status message
CONNECT 9600 or CONNECT 19200' appears on the screen and
you are now ready to commence dialogue with Semaforum BBS. The
modems have a connection for data transmission at a speed of 9600
or 19200' bps
If the modem after receiving the D-command, A-command,
O-
command or after autoanswer, establishes a connection with a
remote modem, a message is sent back to the DTE to confirm this.
Did you receive any alphabetic characters from the remote modem
on your screen? Are you now ready to conduct a dialogue with
Semaforum BBS?
In this case everything appears fine. You can read the next section
and consider the test lesson satisfactorily concluded.
Should everything not be in order, then you may be able to solve the
problem by consulting the section «Trouble-shocting».
2.8
Concluding the connection
Everything went well. You made connection with Semaforum BBS
and now want to finish the communications session. The simplest
way to do this is to press the CALL or ANSW-switch on the front of
the modem.
2-10
LZTR104006 R1.00
Zat
14.4/14.4-7 and Zat 19.2/19.2-7
Advertisement
Table of Contents
