Ericsson ZAT 19.2 Operation Manual page 206

re
Encryption ©
Some common settings for a modem connected to a host:
Speed conversion
-}DTR disconnect
" | Autoanswer on, ignoring DTR
[Auto V42
Recall user defined profile 0 at power up.
AeA Activate manual operation and store the
profile.
Connect from the originator:
When the password "USER 4" is transmitted, the answering
modem disconnects and starts dial back the local modem sends
the resultcode:
NO CARRIER - REMOTE MODEM DIALS BACK
Host modem has made a dialback.
RING
The modem connects in DES mode
CONNECT 2400/REL/2400/V.42BiS/DES (w/LAPM protocol)
or:
CONNECT 2400/REL/2400/MNP 5/DES
The host modem starts the answering procedure.
PAGING HOST - WAIT
Connection to the host is established in DES mode:
CONNECTED TO REMOTE SYSTEM
7-1 2 LZTR104006 R1.00
Zat 14.4/14.4-7 and 19.2/19.2-7