Ericsson ZAT 19.2 Operation Manual page 81

3 . Command sets __
+PZ Delete all keys
Command: +PZ
AT+PZpral [Delete all keys stored in the key table |
It is recommended to delete all keys, if a non authorised person
is going to operate the modem. Confirm the following message :
DELETE ALL KEYS (Y/N)
If ¥ is entered all keys are deleted.
You may use the following command to delete a key, if there is
no space left in the table.
AT+PZ=xxpita| |The modem deletes one key from index "xx"
The following message displays if the corresponding key index
xx doesn't exist in the table
KEY INDEX NOT FOUND
+P=, +P?, +PD, +Pl
Other Password/Dialback commands
Formats:
AT+P=pi|
Insert new password
AT+P? patra] ~
[List all passwords
AT+P2xx piel List only those passwords which start with
ee character(s) xx
AT+PD p=] Delete all passwords
: AT+PD doce Delete password xx
AT+PIOpi| Password checksum control
AT+PI1 ll Password checksum control
Syntax:
AT+P=<Password>:<Telephone number>;<Access level> :cK>:<USER>E *
Restrictions to password entries:
Minimum password length = 4 characters.
Maximum password length = 10 characters
Maximum telephone number length = 30 digits
Memory available for password table = 7 Kbyte
Number of passwords which can be stored:
Minimum 209 entries
(Using maximum password and telephone length)
Typical (Passw =5 chars. Tel no.= 8 digits). 328 entries