.;.4No dial backup if data inactivity.
iy Criteria Inactivity enabled for automatic dial
-[backup.
If the modem detects inactivity in the data stream (see command
+&T) in a period set by the +S8 register, a dial backup using
Call-list 3 will be started. Note that the data inactivity test also
will be active in the backup connection. If data inactivity is
detected in the backup connection the modem will call next
number in Call-list 3. When Call-list 3 is empty the modem will
return to the leased line connection and disregards the inactivity
test until data is received or transmitted.
1.
Call number 1 in Call-list 3.
If connection established: go to 4.
2. __ Are there more numbers in list 3?
po
eee
ed
If no connection: go to 2.
4.__
Connection is established on switched line.
po
I n a c t i v i t y
detected?
#8
|
If Yes. Disconnect. Go to 2.
Go to 4.
5. _ Try to connect at the leased line connection without stop.
6.
Connection established on the leased line.
Disable the inactivity test until data is transmitted.
LZTR104006 R1.00
11-7
Zat 14.4/14.4-7 and 19.2/19.2-7