Table of Contents
Advertisement
4. Registers
S9 Carrier detect Response time
Default:
6 x1/10 of a second
Range:
1-255
Determines the period a carrier must be present before the
modem detects it and turns DCD (Data Carrier Detect) ON.
ATS9=1 00g]
This command causes the carrier detect to be
presenl 100/10 seconds before the modem
detects it and turns DCD (Data Carrier Detect)
ON.
A time increase will reduce the risk of detecting a "false carrier"
such as busy Signal, voices etc.
$10
Lost carrier to hang-up delay.
Default:
1x 1/10 second.
Range:
1-255
Determines the delay between lost carrier from the remote
modem and disconnection of own modem.
carrier from the remote modem and
ATS1
o=1 Spe]
The modem waits 18/10 seconds between lost
:
a
. | disconnection of own modem
If S10 is set to 255 the modem will not disconnect if carrier is
lost.
Associated register: +S13
$11DTMF Dialling speed*
Default:
100
x 1/1000 second.
Range:
65-130
Example:
ATS11=70p2=|
. Waiting 70 msec between each number when
dialling.
"Read more about country dependent parameters in appendix 5
LZTR104006 R1.00
Zat 14.4/14.4-7 and 19.2/19.2-7
Advertisement
Table of Contents
