Ethernet Communications Adapter (A22) - Optional; Eliminator Capacitor (C2) - Optional; Ac Input Circuit Breaker (Cb1); Dc Output Circuit Breaker (Cb2) - HindlePower ATevo Series Operating/Service Instructions Manual
Hide thumbs
Also See for ATevo Series:
- Operating/service instructions manual (164 pages) ,
- Operations (173 pages) ,
- Operating/service instructions manual (311 pages)
Table of Contents
Advertisement
HindlePower Inc
•
Ethernet Communications Adapter (A22) – optional
•
Eliminator Capacitor (C2) – optional
•
AC Input Circuit Breaker
•
DC Output Circuit Breaker
•
Main Filter Inductor
•
Secondary Filter Inductor
•
Power Isolation Transformer
For detailed component location and orientation, refer to the Style-5054 Internal Component
Layout Drawings
(JE5252-01
Rectifier Assembly (A6)
Rectifier Assembly (A6)
This is a grouping of an aluminum heatsink and a Silicon-Controlled Rectifier (SCR) module. It is
mounted on the left side of ATevo in Style-5054 enclosures. The Rectifier (A6) converts single-
phase alternating current (ac) power to direct current (dc) for the battery.
Remote Temperature Probe (A10) – optional
Remote Temperature Probe (A10) – optional
The battery temperature compensation, or 'TempCo', probe (A10) contains a temperature-
dependent resistor in an epoxy module. When used, this probe is installed on the battery and is
connected to the Power Board (A2) at TB8.
Copyright HindlePower Inc. 2021
& JE5252-21).
ATevo O&SI - 1PH Input Group I (6-25 Adc) - 1.1_en
Last modified: 3 August 2023
Page 31 of 316
Advertisement
Table of Contents
