HindlePower Inc
ATevo O&SI - 1PH Input Group I (6-25 Adc) - 1.1_en
6.5.1.
6.5.1. Installing SD Memory Card
Installing SD Memory Card
Purchasing the SD card through an ATevo supplier will ensure that it has been tested and
verified to work with the ATevo.
When installing the SD card, face the contacts down toward the Main Control Board. Gently
press the card into the socket until you feel the card locking mechanism 'click'. To remove,
gently press the card further into the socket then allow it to 'snap' back to disengage from the
locking mechanism. Pull the SD card out.
Last modified: 3 August 2023
Copyright HindlePower Inc. 2021
Page 153 of 316