HindlePower Inc
4.7.
4.7. Configuring Serial Communications
Configuring Serial Communications
Adapter
Adapter
ATevo can support up to three (3) optional Serial Adapter modules.
Each Serial Adapter module can:
• support SCADA protocols (DNP3 or Modbus)
• be used as a standard communications interface to connect to external serial devices
• be used in various applications (such as Forced Load Sharing)
*
Instructions on how to configure Serial Communications Adapters are found in
JA0102-54.
Copyright HindlePower Inc. 2021
ATevo O&SI - 1PH Input Group I (6-25 Adc) - 1.1_en
Last modified: 26 July 2023
Page 116 of 316