Resetting Latched Relays (Legacy Method) - HindlePower ATevo Series Operating/Service Instructions Manual

HindlePower Inc
5.1.5. 5.1.5. Resetting Latched Relays (legacy Resetting Latched Relays (legacy
method) method)
Latched relays can be RESET (or cleared) by pressing and holding the UP arrow button until
ATevo displays the RESET LATCHED ALARMS confirmation screen.
*
ATevo's Reset Latched Alarms function is identical to the Reset Latching Alarms
function on legacy AT10.1 chargers.
To select between clearing individual relays, or all relays, use the RELAYS menu icon as
described in Section 7.6, Resetting Latched Alarm
Copyright HindlePower Inc. 2021
ATevo O&SI - 1PH Input Group I (6-25 Adc) - 1.1_en
Relays.
Last modified: 8 September 2023
Page 133 of 316