Home Screen - HindlePower ATevo Series Operating/Service Instructions Manual

HindlePower Inc ATevo O&SI - 1PH Input Group I (6-25 Adc) - 1.1_en
4.1.5.

4.1.5. HOME Screen

HOME Screen
The default HOME screen appears after power up showing the dc bus voltage and dc charger
current, along with the status for CHARGER MODE and EQUALIZE METHOD on the top line.
CHARGE MODES and EQUALIZE METHODS are described in Section 5.1, ATevo Operating Modes.
ATevo will automatically switch back to the HOME screen if no buttons are pushed for ten (10)
minutes, or by pressing ESC one or more times. Each press of ESC returns one level until HOME
is reached.
Last modified: 3 August 2023
Copyright HindlePower Inc. 2021 Page 87 of 316