HindlePower ATevo Series Operating/Service Instructions Manual page 88

HindlePower Inc
4.2. 4.2. Configuring Basic Set Points & Configuring Basic Set Points &
Alarms Alarms
The ATevo is the second generation of the AT Series microprocessor-controlled float battery
chargers. Because its configuration button sequence is identical, users of legacy AT10.1
chargers will easily adapt to ATevo. This section details how to configure basic ATevo set points
and alarms found also on legacy AT10.1 chargers. The process is shown by both (1) video and
(2) instructions with screenshots.
Instructions by Video Instructions by Video
https://www.youtube.com/embed/VjuwjKU7Kt4?rel=0&start=39&end=82
https://www.youtube.com/embed/VjuwjKU7Kt4?rel=0&start=39&end=82
https://www.youtube.com/embed/VjuwjKU7Kt4?rel=0&start=107&end=185
Copyright HindlePower Inc. 2021
ATevo O&SI - 1PH Input Group I (6-25 Adc) - 1.1_en
Page 88 of 316