HindlePower Inc
4.8.
4.8. Configuring Ethernet Adapter
Configuring Ethernet Adapter
ATevo can support an optional Ethernet Adapter (A22) module.
The Ethernet Adapter module:
• can support SCADA protocols (DNP3 or Modbus)
• will support an ATevo web page interface (future)
• will permit a file transfer mechanism to upload/download files for firmware upgrade and
log file transfer (future)
*
For configuration details, refer to the supplementary ATevo Communications
Manual (JA0102-54). This document details communication hardware / wiring,
defines communication capabilities, and lists ATevo front panel configuration.
Finally, it catalogs DNP3 and Modbus communication registers.
Copyright HindlePower Inc. 2021
ATevo O&SI - 1PH Input Group I (6-25 Adc) - 1.1_en
Last modified: 26 July 2023
Page 117 of 316