HindlePower ATevo Series Operating/Service Instructions Manual page 129
Hide thumbs
Also See for ATevo Series:
- Operating/service instructions manual (164 pages) ,
- Operations (173 pages) ,
- Operating/service instructions manual (311 pages)
Table of Contents
Advertisement
HindlePower Inc
5.1.2.
5.1.2. Changing Charge Mode
Changing Charge Mode
https://www.youtube.com/embed//_6nyTznWz6k?rel=0&start=7
ATevo has two (2) output voltage modes that are set with the CHARGE MODE button:
• FLOAT – for nor
normal
• EQUALIZE – to balance
manufacturer's data sheets.
Present charge mode is displayed at the top left of the HOME screen:
• 'Float' appears when charger is in FLOAT mode
• 'Equalize' appears when it is in EQUALIZE mode.
To change Charge Mode:
CHARGE MODE > other displayed choice
When ATevo is in EQUALIZE mode, the charger will:
• Ramp up to the EQUALIZE VOLTAGE set point.
• Start the EQUALIZE TIMER.
• Alternate display between showing the HOME screen and a screen that shows the
EQUALIZE TIME REMAINING.
Copyright HindlePower Inc. 2021
mal battery charging
balance voltage among battery cells. Before using, consult your battery
ATevo O&SI - 1PH Input Group I (6-25 Adc) - 1.1_en
Page 129 of 316
Advertisement
Table of Contents
