Storing Event Log File To Sd Card - HindlePower ATevo Series Operating/Service Instructions Manual
Hide thumbs
Also See for ATevo Series:
- Operating/service instructions manual (164 pages) ,
- Operations (173 pages) ,
- Operating/service instructions manual (311 pages)
Table of Contents
Advertisement
HindlePower Inc
6.5.2.
6.5.2. Storing Event Log File to SD Card
Storing Event Log File to SD Card
ATevo Event Log can be transferred onto SD Memory Card then to a Personal Computer (PC) or
other electronic device for archiving or evaluation. The file is stored in ASCII text format for
easy import into spreadsheets or other third party software.
To copy the Event Log to SD Memory Card:
MENU > EVENT LOGS > 'Copy event log to SD card'
The screen will briefly confirm the file was copied successfully. The event log file is written to a
file named ATgvaixx.LOG where:
• 'g' specifies charger family: (1) <= 25 A, (2) > 25A, (3) = 3 phase.
• 'v' specifies dc voltage: (A) = 12V, (B)= 24V, ( C ) = 48V, (D) = 130V, (E) = 260V.
• 'a' specifies dc current: (A) = 6A, (B) = 12 A, ( C ) = 16A, (D) = 20A, (E) = 25A.
• 'i' specifies charger iD (A-Z): per SYSTEM INFO menu.
• 'xx' is a sequential number.
Each time the event log file is stored it is written to a new file whereby 'xx' increments by one.
This prevents previous event log files stored on the SD Memory Card from being overwritten.
Copyright HindlePower Inc. 2021
ATevo O&SI - 1PH Input Group I (6-25 Adc) - 1.1_en
Last modified: 3 August 2023
Page 154 of 316
Advertisement
Table of Contents
