HindlePower ATevo Series Operating/Service Instructions Manual page 121

HindlePower Inc
4.10.2. 4.10.2. Setting Up Ground Imbalance Setting Up Ground Imbalance
Alarm Alarm
To change the imbalance alarm (measured in Vdc), press MENU, then select GROUND ALARM:
• Navigate to Vgnd Imbalance W Vgnd Imbalance War arning
• Select it with EDIT/ENTER.
• Press UP and DOWN to change setting value.
• Once desired setting is displayed, press EDIT/ENTER to store it.
• Repeat process for Vgnd Imbalance Critical
*
For further information regarding ATevo ground alarms, including instructions for
locating and identifying faults, refer to supplemental instructions (JA5124-09
and/or JD5032-00).
Copyright HindlePower Inc. 2021
ning using UP and DOWN.
Vgnd Imbalance Critical.
ATevo O&SI - 1PH Input Group I (6-25 Adc) - 1.1_en
Last modified: 26 July 2023
Page 121 of 316