HindlePower ATevo Series Operating/Service Instructions Manual page 164

HindlePower Inc
Frequently Asked Questions ( Frequently Asked Questions (FAQ
Q: Q: Can an ATevo running firmware prior to v2.7.0 use the new file format?
A A : : No. If your ATevo runs firmware prior to v2.7.0, the manufacturer must supply you with
the two old-format firmware upgrade files. You can reference
information.
Q: Q: Does ATevo firmware v2.7.0 recognize the older file format? Is it possible to upgrade the
firmware using the two old-format upgrade files?
A A : : Yes and yes. ATevo firmware v2.7.0 can be updated using the older, separate files.
Support for the older file format will eventually be removed. At that time, the single file
using the new format must be used.
Q: Q: What if new and old format firmware files are on a memory card used to update an ATevo?
A A : : If the card is in an ATevo running v2.6.6 and prior, it will only recognize the older file
types. An ATevo running 2.7.0 and later will first look for the newer file types (.HPB
extension) and display a list to choose from. The update will be performed using one of
those files If the user selects one. The older files will be ignored in this case. If the user
presses ESC rather than choosing one of the new file types it will then check for the older
file types. If they are found, the UI will offer to update using them.
Copyright HindlePower Inc. 2021
ATevo O&SI - 1PH Input Group I (6-25 Adc) - 1.1_en
FAQs) s)
the previous topic for more
Last modified: 3 August 2023
Page 164 of 316