HindlePower Inc
2.11.
2.11. Wiring Ethernet Adapter
Wiring Ethernet Adapter
ATevo will support an optional Ethernet Adapter Board (A22). It mounts on the ATevo's front
panel door, by plugging directly into the Main Control Board (A1) via connection point P13.
*
For wiring instructions of the ATevo Communications Adapters (A12, A13 & A22),
refer to the supplementary Communications Manual (JA0102-54).
This document also details communication hardware, defines communication
capabilities, and lists ATevo front panel configuration. Finally, it catalogs DNP3
and Modbus communication registers.
Copyright HindlePower Inc. 2021
ATevo O&SI - 1PH Input Group I (6-25 Adc) - 1.1_en
Last modified: 6 September 2023
Page 61 of 316