HindlePower ATevo Series Operating/Service Instructions Manual page 34
Hide thumbs
Also See for ATevo Series:
- Operating/service instructions manual (164 pages) ,
- Operations (173 pages) ,
- Operating/service instructions manual (311 pages)
Table of Contents
Advertisement
HindlePower Inc
2.1.3.
2.1.3. Auxiliary I/O Board (A4) – optional
Auxiliary I/O Board (A4) – optional
Shown at top-left of silkscreen. Bolted to heat sink on the left side, above the Power Board.
Plugs directly into Power Board (A2).
• six (6) relays, four (4) Binary Inputs, and four (4) Analog Inputs
• relays can be configured to indicate status of six (6) different alarms or status points
• independently-isolated Binary Inputs can be configured to report ON/OFF status of four (4)
controls
• Analog Inputs include input scaling and can report the status of four (4) analog controls
referenced to the dc bus
Copyright HindlePower Inc. 2021
ATevo O&SI - 1PH Input Group I (6-25 Adc) - 1.1_en
Last modified: 18 July 2023
Page 34 of 316
Advertisement
Table of Contents
