HindlePower ATevo Series Operating/Service Instructions Manual page 170

HindlePower Inc
7.4. 7.4. Viewing Alarms Viewing Alarms
Alarms can be viewed in the three different ways:
7.4.1 Active Alarm Bar 7.4.1 Active Alarm Bar
The Active Alarm Bar is located at the bottom of the Home Screen.
Key points regarding the Active Alarm Bar:
• It reports any and all active alarms, and is blank if there are none.
• If multiple alarms are active, it cycles through each alarm.
7.4.2 Active Alarm List 7.4.2 Active Alarm List
The Active Alarm List displays all active alarms. To view the Active Alarm List, press the
ALARMS button.
The Active Alarm List can display up to four active alarms at once but it is scrollable to view
any additional alarms present.
7.4.3 Alarm Logs 7.4.3 Alarm Logs
Alarms are system events that are stored in ATevo's event log with a time and date stamp. The
same is true for alarm clearing (return to non-alarm state).
Copyright HindlePower Inc. 2021
ATevo O&SI - 1PH Input Group I (6-25 Adc) - 1.1_en
Section 9 contains information on
Page 170 of 316