HindlePower ATevo Series Operating/Service Instructions Manual page 45

HindlePower Inc
2.1.14. 2.1.14. Power Isolation Transformer Power Isolation Transformer
(T1) (T1)
Shown at center of silkscreen. Located on back wall above the filter inductors (L1/L2). Provides
isolation and converts ac input voltage to appropriate potential, prior to rectification.
*
ATevos with the multi-tap ac input option (smart part code 'MT1/2'), feature a
terminal block (TB-H#) mounted above the AC Input Circuit Breaker (CB1) for
voltage selection. Jumper positions are shown on silkscreen to right of Power
Isolation Transformer (T1). See Section entitled ATevo with Selectable Input
Voltage for details.
Copyright HindlePower Inc. 2021
ATevo O&SI - 1PH Input Group I (6-25 Adc) - 1.1_en
Last modified: 18 July 2023
Page 45 of 316