HindlePower ATevo Series Operating/Service Instructions Manual page 69

HindlePower Inc ATevo O&SI - 1PH Input Group I (6-25 Adc) - 1.1_en
3.2.3. 3.2.3. Status Screens Status Screens
ATevo Status screens do not permit any system changes, and are used only for viewing
information. Most of the status screens (e.g. Event Log and Active Alarm List) are covered in
Section 6, Advanced Operation. The HOME screen can be thought of as a 'special' Status
Screen in that it can indicate dc output voltage (Vdc), dc output current (Adc), and status of
Equalize/Float mode and method.
Last modified: 19 July 2023
Copyright HindlePower Inc. 2021 Page 69 of 316