HindlePower ATevo Series Operating/Service Instructions Manual page 48

HindlePower Inc
2.3.1. 2.3.1. Determining if Multi-Tap Option is Determining if Multi-Tap Option is
Present Present
Check the ATevo nameplate. If the ac input voltage is listed as 120/208/240 or 115/220/240
Vac, the ATevo is equipped with the multi-tap option. If the nameplate is not visible:
• Open the ATevo front panel door.
• Behind the safety shield, look for a gray terminal block directly
above the AC Input Circuit Breaker (CB1).
◦ Reference the input voltage selection silk-screened on the
center-right of the safety shield.
◦ If this terminal block is present, the ATevo is equipped with
the multi-tap ac input voltage option.
Copyright HindlePower Inc. 2021
ATevo O&SI - 1PH Input Group I (6-25 Adc) - 1.1_en
Last modified: 9 February 2021
Page 48 of 316