HindlePower Inc
11.6.
11.6. Enabling Remote Sense
Enabling Remote Sense
Compensation
Compensation
ATevo monitors charger voltage on the inside of the DC Output Circuit Breaker (CB2). The
construction of this component features a small amount of internal resistance. In certain
(24Vdc & 48Vdc) models, breaker types, or depending on required sensitivities, this may affect
remote sense voltage calculations.
To enable Remote Sense Compensation, press MENU, then select ADVANCED SETTINGS.
• Navigate to R R emote Sense Enable
emote Sense Enable using UP and DOWN.
• Select it with EDIT/ENTER.
• Press UP and DOWN to change setting to on
• Once desired setting is displayed, press EDIT/ENTER to store it.
Copyright HindlePower Inc. 2021
ATevo O&SI - 1PH Input Group I (6-25 Adc) - 1.1_en
on.
Last modified: 1 August 2023
Page 212 of 316