HindlePower ATevo Series Operating/Service Instructions Manual page 49

HindlePower Inc
2.3.2. 2.3.2. Verifying Multi-Tap AC Input Verifying Multi-Tap AC Input
Voltage Setting Voltage Setting
Copyright HindlePower Inc. 2021
Before you connect ac power to ATevo, inspect the present ac input
voltage setting, and confirm the correct jumper positions for the
desired ac input supply voltage. The multi-tap ac input voltage
setting can be verified without removing the safety shield.
• Open ATevo's front door and locate the Multi-Tap terminal
block above the AC Input Breaker (CB1).
• Observe the relative locations of the
Multi-Tap terminal block (TB-H#).
• Refer to the adjacent diagram to confirm the present ac
input voltage setting is correct.
ATevo O&SI - 1PH Input Group I (6-25 Adc) - 1.1_en
RED RED
Last modified: 18 July 2023
jumpers in the
Page 49 of 316