HindlePower ATevo Series Operating/Service Instructions Manual page 60

HindlePower Inc
2.10. 2.10. Wiring Serial Communications Wiring Serial Communications
Adapters Adapters
ATevo will support up to three (3) optional Serial Communications Adapter pc boards. They
mount on the ATevo's front panel door, by plugging directly into the Main Control Board (A1) via
connection points P10, P11, and P12.
*
For wiring instructions of the ATevo Communications Adapters (A12, A13 & A22),
refer to the supplementary Communications Manual (JA0102-54).
This document also details communication hardware, defines communication
capabilities, and lists ATevo front panel configuration. Finally, it catalogs DNP3
and Modbus communication registers.
Copyright HindlePower Inc. 2021
ATevo O&SI - 1PH Input Group I (6-25 Adc) - 1.1_en
Last modified: 6 September 2023
Page 60 of 316