HindlePower ATevo Series Operating/Service Instructions Manual page 67

HindlePower Inc
3.2.1. 3.2.1. Home Screen Home Screen
The HOME screen is the primary ATevo display, and is active most of the time ATevo is
energized. Other screens are displayed during configuration changes, during testing, when the
user requests more detailed status than what is provided on the HOME screen, or when the
user wishes to utilize one of the advanced ATevo features.
• The Factory Default HOME Screen displays the output voltage (Vdc) and output current
(Adc) in a large font for easy reading.
• 'Float' or 'Equalize' will appear on the left side of the top of the display to indicate that
the charger is actively in either FLOAT or EQUALIZE CHARGE MODE.
• 'Eqlz Mthd: Man' or 'Eqlz Mthd: Auto' will appear on the right side of the top of the display
to indicate that the EQUALIZE METHOD is presently configured for MANUAL TIMER or
AUTOMATIC TIMER mode.
• If a Temperature Compensation (TempCo) Probe option is installed and enabled, the
present battery temperature and normalized voltage set point will also appear on the
display (see Section 10
Copyright HindlePower Inc. 2021
for more details on the TempCo option and display).
ATevo O&SI - 1PH Input Group I (6-25 Adc) - 1.1_en
Last modified: 19 July 2023
Page 67 of 316