HindlePower ATevo Series Operating/Service Instructions Manual page 128

HindlePower Inc
5.1.1. 5.1.1. Changing Display Mode Changing Display Mode
The DISPLAY MODE button selects the HOME Screen display choices:
• DC Voltage and Current (Vdc / Adc output)
• Date and Time (refer to
• Ground Meter (refer to
• Rectifier Temperature (refer to
• AC Meter – optional (refer to JA5124-03)
• Battery Current Meter – optional (refer to JA5124-07)
To change Display Mode:
DISPLAY MODE > one of 6 displayed choices
*
The DISPLAY MODE button is in the same relative location as the METER MODE
button on legacy AT10.1 chargers. Its functionality is equivalent in that it
determines which measurements are to be shown on the HOME screen.
Copyright HindlePower Inc. 2021
https://www.youtube.com/embed//bEc7qvyGcBY?rel=0&start=8
Section 3.2.5)
Section 3.2.5
Section
ATevo O&SI - 1PH Input Group I (6-25 Adc) - 1.1_en
and/or JA5124-09)
3.2.5)
Last modified: 8 September 2023
Page 128 of 316