Connecting Ac Power Cables And Pe Wires To The Power Cabinet; Removing The Protection Covers - ABB HVC-R 100/150 V2 Installation Manual

5.6. Connecting AC power cables and PE wires to the Power Cabinet

5.6.1. Removing the protection covers

Prerequisites:

Tools: cross-head screwdriver
1. Remove the protection plate (A) by loosening the screws (B).
2. Put the protection plate and screws in a safe location as they will be installed back later
on.
Removing protection covers form the connector block
3. Remove the 3 protection covers (D) from the connector blocks (C).
4. Put the protection covers in a safe location as they will be installed back later on.
Document: v0.1 / Document No.: TBA | Date: XX-08-2021
Removing the protection plate
HVC-R 100/150 V2 E-Bus Charger Installation Guide
Page 69 of 133