Connecting The Communication Cable To The Power Cabinet; Routing The Cable To The Terminal Blocks - ABB HVC-R 100/150 V2 Installation Manual

HVC-R 100/150 V2 E-Bus Charger Installation Guide

5.9. Connecting the communication cable to the Power Cabinet

Prerequisites:

Tools: ty-raps

5.9.1. Routing the cable to the terminal blocks

Preferred cable route
Route the communication fiber cable to module D1 (B) and D2 (A). Refer to the figure for the
preferred cable route inside the cabinet.
Document: v0.1 / Document No.: TBA | Date: XX-08-2021 Page 80 of 133