Tilting And Handling - ABB HVC-R 100/150 V2 Installation Manual


You are not allowed to modify the charge system without the permission of ABB. The
Owner is cautioned that changes or modifications not expressly approved by ABB
could void the Owner's authority to operate the equipment and ABB's warranty policy.

Neither ABB nor its affiliates shall be liable to the purchaser of this product or third
parties for damages, losses, costs or expenses borne by the Purchaser or third parties
as a result of: an accident, misuse or abuse of the product or unauthorized
modifications, repairs or alterations to the product, or failure to strictly comply to the
ABB operating and maintenance instructions.

1.4.2. Tilting and handling

Heavy equipment
Handling instructions:
1. Use crane or forklift truck when lifting or moving the Power Cabinet.
2. Do not drop parts of the HVC-R 100/150 V2 E-Bus Charger.
3. Do not exceed the tilting angle of 30⁰ while moving or performing
4. Read and follow the ABB Guidance on the requirements for safe
Personal safety (PPE)
Always wear a safety helmet, safety gloves and safety shoes when you
perform the work that involves lifting and tilting the equipment.
Make sure that personnel cannot be crushed or become trapped during
lifting and tilting work.
Lifting activities
It is a legal requirement that all activities involving lifting equipment are planned and that they
are conducted under effective supervision and managed based on the risk, complexity of the
activity and the work environment (EU directive 2009/104/EEG, appendix II, chapter 3.2.5).
It is of great importance, regardless of location, that any lifting activity is performed safely
(refer to the guide below).

It must be carried out within the framework of an effective management system;

It must be properly planned;

Its risks have to be assessed;

Supervision must be performed over it;

It must be performed by skilled personnel and with the appropriate means.
All lifting activities must be performed under the ABB Guidance on the requirements for safe
operation of mobile cranes (ML-03, 9Akk104941D0113).
When applying this Standard, local laws and regulations must be taken into account at all
times. In the event of conflicts, local laws and regulations prevail over this Standard.
Document: v0.1 / Document No.: TBA | Date: XX-08-2021
works on the Power Cabinet.
operation of mobile cranes (ML-03, 9Akk104941D0113).
HVC-R 100/150 V2 E-Bus Charger Installation Guide
CAUTION
WARNING
WARNING
Page 9 of 133