Connecting The Dc Power In- And Output Cables - ABB HVC-R 100/150 V2 Installation Manual

5.14.7.

Connecting the DC power in- and output cables

Prerequisites:

Tools: wire cutter, wire stripper pliers, cable lugs, spanner (size 17), torque wrench
(size 17).
It is not allowed to remove the connector plates (I - in the picture below),
nor to loosen their mountings.
Document: v0.1 / Document No.: TBA | Date: XX-08-2021
Location of the DC power input connectors.
Instructions on preparing the DC wires.
HVC-R 100/150 V2 E-Bus Charger Installation Guide
WARNING
Page 98 of 133