Safety Regulations; Owner Responsibilities - ABB HVC-R 100/150 V2 Installation Manual

Pinch Hazard
Identifies a hazard that could result in injuries including the cases in which
some body parts may be pinched or crushed.
Fall Hazard
Identifies a hazard that could result in injury due to unsafe work at height.
Various
Identifies a hazard that could result in damage to the machine, other
equipment, and/or environmental pollution.
Environmental damage
Identifies special indications as well as biddings and prohibitions to avoid
damage to the environment. This sign refers to present national
regulations concerning the environment.
Contains remarks, suggestions or advice.

1.4. Safety regulations

1.4.1. Owner responsibilities

The Owner and site operator are required:

To operate the charge station with the protective devices installed and to make sure
all protective devices are correctly installed after carrying out installation or
maintenance.

To prepare a plan containing instructions on actions to be taken in case of an
emergency.

To prepare the site where the charge station will be installed according to the
requirements described in this guide.

To make sure that there is enough space around the charger to carry out maintenance
work.

To appoint a person responsible for the safe operation of the charge station and for
the coordination of all works.

All works have to be carried out by qualified
estimate their designated works in order to identify and avoid hazards. They must
possess experience and adequate knowledge of: safety regulations and labor medical
regulations, accident prevention regulations, guidelines and approved safety
regulations, and special instructions concerning possible occurrence of dangers.
Document: v0.1 / Document No.: TBA | Date: XX-08-2021
HVC-R 100/150 V2 E-Bus Charger Installation Guide
WARNING
WARNING
CAUTION
CAUTION
NOTICE
personnel. All qualified personnel have to
Page 8 of 133