Connect Ac Power Cable And Gnd Wires Power Cabinets; Remove The Protection Covers - ABB HVC Installation Manual

HVC 450 kW E-Bus Charger Installation Guide
3. Insert the M12 bolts (C) into the holes (4x).
4. Tighten the bolts.

5.6. Connect AC power cable and GND wires Power Cabinets

5.6.1. Remove the protection covers

Preconditions:

Tools: cross-head screwdriver
1. Remove the protection plate (A) by loosening the screws (B).
2. Put the protection plate and screws in a safe location as it will be installed again later
on.
3. Remove the 3 protection covers (D) from the connector blocks (C).
4. Put the protection covers in a safe location as it will be installed again later on.
Revision: 1.2
Date released: 16-08-2018
COMPANY CONFIDENTIAL
Page 64 of 128