Tightening Sliding Plates Of The Guidance Plates - ABB HVC-R 100/150 V2 Installation Manual

A minimum length of 3000 mm is required, as the cable connectors are
located in the middle of the Power Cabinet.

5.5.5. Tightening sliding plates of the guidance plates

Prerequisites:

Tools: spanner (size 13).
1. Move the sliding plates (B).
2. Tighten the bolts (A).
Document: v0.1 / Document No.: TBA | Date: XX-08-2021
Securing the cables with the guidance plates
HVC-R 100/150 V2 E-Bus Charger Installation Guide
NOTICE
Page 65 of 133