Table of Contents
Advertisement
5.6.4. Installing the protection covers
Prerequisites:
Tools: cross-head screwdriver
Attaching protection covers to the connector block
1.
Take the 3 protection covers (previously removed in Removing the protection covers on
Page 69).
2.
Place the protection covers (D) back on the connector blocks (C).
3.
Take the protection plate and the screws (previously removed in Removing the
protection covers on Page 69).
4.
Place the protection plate (A) back over the main switch and connector blocks and
secure the plate with the screws (B).
Document: v0.1 / Document No.: TBA | Date: XX-08-2021
Attaching the protection plate
HVC-R 100/150 V2 E-Bus Charger Installation Guide
Page 72 of 133
Advertisement
Table of Contents
