Piper COMANCHE PA-24-180 Service Manual page 594

PIPER COMANCHE SERVICE MANUAL
9-102. Navigation Lighs.
9-103. Removal Of Wing Navigation Light.
a To remove bulb, remove the screws secunng the plexiglass window.
b. Remove screws securing the lens retainer.
c. Remove lens and bulb.
NOTE
To remove the complete lamp assembly, the wing tip must be removed.
9-104. Installation Of Wing Navigation Light.
a. I . il bulb, lens and lens retainer and secure with appropriate screws.
b. Place plexiglas window in position on wing tip and secure with appropriate screws.
9-105. Removal Of Tail Navigation Light.
a. To remove bulb, remove the screws securing the light assembly to the rudder tip and remove the
lens.
b. Remove the bulb.
NOTE
To remove the complete light assembly unsolder the electrical lead from
the base of the light assembly and disconnect the remaining electrical
lead at the connector.
9-106 Installation Of Tail Navigation Light.
a. Install bulb and lens in light assembly.
b. Place light assembly in position on rudder tip and secure with appropriate screws.
9-107 Removal Of Lamp In Anti-Collision Wing Tip Strobe Light. The lights are located in both wing tips
next to the navigational lights.
. Remove the screws securing the plexiglas window to the wing tip and remove window
b. Remove the screw securing the navigatonal light cover and remove cover.
c. Remove the three screws securing navigational light bracket assembly and remove light assembly
d. Remove the strobe lamp by cutting the wires on the lamp beneath the mounting bracket.
e.
Remove the defective lamp.
f. Remove and ducard the plug with the cut wires from the electrical socket.
ELECTRICAL SYSTEM
ISSUED: 8/18/72
3 C24