Piper COMANCHE PA-24-180 Service Manual page 369

7nn
PIPER COMANCHE SERVICE MANUAL
7
5
4
2
FIGURE 7A-10. CARBURETOR
7A-50. Removal Of Carburetor.
a. Remove ne lower cowling as described in paragraph 7A-5.
b. Disconnect the throttle and mixture control cables from the carburetor
c. Disconnect the carburetor heat control cable from the air box.
d. Disconnect the carburetor heat air duct from the air box.
e. Disconnect fuel line from carburetor.
f. Remove carburetor from the engine sump by removing pal locknuts. nuts and washers.
g. Cut safety wire and remove bolts attaching the a:r box to the carburetor.
7A-5 1. Installaion Of Carburetor.
a. Secure air box with gasKer to the carburetor using cap bolts and washers. Safery with lock wire
b Insrall gasket and carburetor on the bottom of the sump and secure with washers. nuts and pal
locknuts.
c. Connect fuel line to carburetor
d.
Connect throttle, mixture and carburetor heat control cables to carburetor and air box.
e. Connect carburetor neat air duct to air box.
POWER PLANT
ISSUED: 8/18/72
2 Dil