Piper COMANCHE PA-24-180 Service Manual page 105

PIPER COMANCHE SERVICE MANUAL
1. Winldo 3. Ltp S. Mounting Braclet
FICURE -1. LANDING LIGHT INSTALLATION
4-7. Remval Of Allren.
a. Disconnect the aileron control rod at the inboard aileron hinge.
b. Remove the hinge bolts, keeping track of the location of the spacer washers.
c. Pull the aUlron straight off the wing to a ow :he couner-weight to clear.
4-8. Removal Of Plop (Maually Operted).
a Remove the access plate to the flap bellcrank located on the rear-under side of the wing at
approximately the center of the flap.
b. Disconnect the flap control rod end bellcrank, return spring at the bellcrank.
c. Remove the hinge bolts.
d. Pull the flap straight off the wing.
4-9. Removal Of Flap. (PA*24-250 Elentically Operated And PA-24260)
a. Remove the access plate to the flap belcrank located on the rear-under side of the wing at
approximately the center of the flap. Remove the main gear wheel well splash pan.
b. Located at the rear inboard portion of the right wing is a combination flap return and step
lock. By entering through the wheel well, release spring tension and disengage the step lock.
In the left wing is a flap return spring only, relase the spring tension.
c. Disconnect the flap control rod and bellcrank return spring at the bellcrank.
d. Under the inboard end of the right flap is an access plate to the step lock return cable.
Back the adjusting nut off the cable end. The left wing, disconnect the flap return cable at the
leading edge of the flap.
STRUCTURE
ISSUED: 8/18/72
1 E9