Piper COMANCHE PA-24-180 Service Manual page 183

PIPER COMANCHE SERVICE MAUUAL
TABLE V-ll. TROUBLESHOOTING CHART (SURFACE CONTROLS) (cooL)
Trouble
Cause
Remedy
STABILATOR TRIM CONTROL SYSTEM (con.)
Tnrim indicator fails
to ndicate correct
trim position.
Trim indictor not
properly adjusted.
Adjust in accordance
with Paragraph 5-39
Trim indicator wire
broken.
Replace wire.
Tnm indicator fails
to indicate any
movement.
Trim indicator wire
broken.
Replace wire.
Broken indicator tension
spring.
Forward trim pulley
slipping when crank
is umned.
Replace spring.
Check for oil or
grease or loose
cables and tighten
in accordance with
Table V-..
SURFACE CONTROLS
ISSUED: 8/18/72
IH15