PIPER COMANCHE SERVICE MANUAL
6
7
1
SPINNER
2 BLADE
3 WASHER
4 SPINNER ADAPTOR RING
6 ENGINE STARTER GEAR
B BOLT
7 WASHER
B HUB MOUNTING BOLT
9 NUT
10 "O" RING SEAL
11 PROPELLER MOUNTING SHIM
I
FIGURE 7.3. PROPELLER INSTALLATION (HARTZELL)
CAUTION
It is absolutely essenial that shim (11) be inauled as failure to do so
nmy result in failure of the mounting bols due to relacve movement of
the two flanges.
f.
Rase the propeller into pouston with the engine and slide the propeller
mounting bushings.
g. Instll the propeller hub mounting bolts (8) in the propeller hub and tighten
give n Table VII-I.
h. Check blade trck. (Refer to plgrnph
7-15 )
i.
Safety-wire the mounting bolts and nsall spinner.
onto the propeller
them to me torque
POWER PLANT
ISSUED: 8/18/72
0
2A18