Piper COMANCHE PA-24-180 Service Manual page 268

WARNING
PIPER COMANCHE SERVICE MANUAL
6.106. installation Of Brake Matr Cylinder. (Refer to Figure 6-37A.)
a.
Position the cylinder in ia mountng backet and insert the upper mounting clevis bolt from the
inboard side of each cylinder a shown in Figure 6-37A, and secure with washer, nut and cotter pin.
WARNING
The upper mounting devis bolt must be installed as shown in Figure
6-37A.
b. Insert the parking brake cble through the bushing in the actuaing rm and secure with set screw.
c
Clamp the cable housing to the upper par of the cylinder assembly.
d. Connect the brake fluid lines to the cylinder fitings.
e.
Bleed the brake system per instrucions given in paragraph 6-88.
FIGURE 6-37A. BRAKE CYLINDER INSTALLATION
LANDING GEAR AND
ISSUED: 8/18/72
BRAKE SYSTEM
0
1L4