Piper COMANCHE PA-24-180 Service Manual page 12

PIPER COMANCHE SERVICE MANUAL
LIST OF ILLUSTRATIONS (continued)
Figure No.
Subject
Grid No.
9-27s.
Testing Overvoltage Control
3C9
9-27t.
No-Load Test
3C 11
9-27u.
Lock-Torque Test
3C 12
9-28. Not Used.
9-29. Not Used.
9-29a.
Exploded View of Gear Reduction Starting Motor
3C14
9-29b.
Turning Starting Motor Commutator
3C17
9-29c.
Testing Motor Armature for Shorts
3C17
9-29d.
Testing Motor Fields for Grounds
3C17
9-29e.
No-Load Test Hookup
3C18
9-29f.
Stall-Torque Hookup
3C18
10-1.
Cabin Heater, Defroster and Fresh Air System - PA-24-180 and PA-24-250
(Serial Nos. 24-1 to 24-1251)
3F9
10-2.
Cabin Heater, Defroster and Fresh Air System - PA-24-180 and PA-24-250
(Serial Nos. 24-1252 to 24-2298)
3F10
10-3.
Cabin Heater, Defroster and Fresh Air System - PA-24-180 and PA-24-250
(Serial Nos. 24-2299 and up)
3FII
10-4.
- Cabin Heater, Defroster and Fresh Air System - PA-24-260
(Serial Nos. 24-4000 to 24-4246, 244248 to 24-4299)
3F12
10-5.
Cabin Heater, Defroster and Fresh Air System - PA-24-260
(Serial Nos. 24-4247, 24-4300 to 24-4782 incl.; 24-4784 to 24-4803 incl.) 3F13
10-6.
Cabin Heater, Defroster and Fresh Air System - PA-24-400
3F14
10-7.
Cabin Heater, Defroster and Fresh Air System - PA-24-260
(Serial Nos. 24-4783, 24-4804 and up)
3F15
11-1.
Instrument Panel
3F24
12-1.
Avionics Antenna Locations
3H5
NOTE
Refer to Electrical Schematics Index at 3D7
Appendix No. I
1.
Control Cable Inspection Technique
IL18
2.
External Cable Wear Patterns
IL18
3.
Internal Cable Wear
1L19
4.
Pulley Wear Patterns
1L20
PREFACE
Revised: 8/15/98
1A12