Piper COMANCHE PA-24-180 Service Manual page 261

PIPER COMANCHE SERVICE MANUAL
6-93. Installation Of Brake Master Cylinder. (Refer to Figure 6-34A.)
a. Position the cylinder in its mounting bracket and insert the upper mounting clevis bolt from the
inboard side of each cylinder as shown in Figure 6-34A, nd secure with wsher, nut and cotter pin.
WARNING
The upper mounting devis bolts must be installed u shown in Figure
6-34A.
b. Insert the parking bake cable through the bushing in the acruating arm and secure with se screw.
c. Clamp the cable housing to the upper part of the cylinder assembly.
d Connect the brake fluid lines to the cylinder fittings.
e.
Bleed the brake system per instructions given in paragraph 68.
A
WARNING
FIGURE 6-34A. BRAKE CYLINDER INSTALLATION
LANDING GEAR AND BRAKE SYSTEM
ISSUED: 8/18/72
1K21