Piper COMANCHE PA-24-180 Service Manual page 404

3
PIPER COMANCHE SERVICE MANUAL
FIGURE 7B-1. PROPELLER INSTALLATION
7B-8. Removal Of Propeller. (Refer to Figure 78-1.)
NOTE
In some manner identify the posiion of
other to faciliate installation.
each pur in relation to the
a.
Remove the spinner (1) by removing he screws rhat secure it to the spinner bulkhead (7).
b. Place a dnp pan under the propeller to catch oil spillage.
c. Cut the safety wire around the propeller mounting bolts (4) and remove the bolts from the engine
crankshaft flange.
d.
Pull the propeller from the engine crankshaft.
e.
Remove the propeller "0" ring (6) and shim (5) from the engine flange.
f.
The spinner bulkhr.
may be removed from the starer ring gear (8) by removing nus, washers
and bolts.
POWER PLANT
ISSUED: 8/18/72
2 E22