Piper COMANCHE PA-24-180 Service Manual page 221

PIPER COMANCHE SERVICE MANUAL
p. Extend the gear and remove bungee tooL
q. Connect the retraction push-pull able (21) to the upper drag link with attaching bolt and adjust
(Refer to paragraph 6-55 for adjustment of push-pll control cabes.)
r. Install the aist spring (19) between the strut housing and upper dg link, (See NOTE above.)
s. Extend and retrat the main gear maually to check that each link assembly lock simuluaneously
and independendy of each other.
NOTE
Following
adjusment
to any of dte three gens in which the control
ub/rod were disconnected with aireafe on jacks, the rmnission
disconnected acerin
that all three gear drg links go over enter and
lock a the sme ime independendy of each other.
c Install main landing gear down limit switch (25) and adjus. (Refer o paragraph 6-53 for
adjustment of landing gear down limit swirches.)
u. Inral landing
ar safety iwitch (28) (left ger only) and djust (Refer to paragraph 6-52 for
adjusnent of safety switch.)
v. Connect the brake iine
w. Connec the landing ear door remacion rod to he bracker on the main ge srut housing.
REVISED: 4/3/78
LANDING GEAR AND BRAKE SYSTEM
1J5