Piper COMANCHE PA-24-180 Service Manual page 182

PIPER COMANCHE SERVICE MANUAL
TABLE V-n. TROUBLESHOOTING CHART (SURFACE CONTROLS) (cooL)
Trouble
I
Cuue
I
Remedy
STABILATOR TRIM CONTROL SYSTEM
Los motion between
rmm control handle.
Cable tension oo low.
Adjust in ccordance
wirs Table V-l.
Cables not in place on
pulleys.
Broken pulley.
Linkage loose or worn.
Insall cables according
to Pangraph 5-38.
Replace pulley.
Check linkage and right-
en or replace.
Trim conrol handle
moves with excessive
resisance.
Sysem not lubricated
property.
Lubricate system. (Re-
fer to Lubrication
Chart. Section II.
Cable tension too high.
Pulleys binding or rub-
bing.
Cables not in place on
pulleys.
Trim cab hinge binding.
Cables crossed or
routed incorrecly.
Adjust in accordance
with Table V-l.
Replace binding pulleys.
Provide clearance
between pulleys and
brackets.
Refer to Pargraphs
5-38.
Lubricate hinge. If
necessary, replace.
Check rouing of con-
trol cables.
0
Trim tab fails to
reach full ravel.
System incorrectly rig-
ged.
Check and/or adjust
riling per Pan-
graph 5-39
Trim drum incorrectly
wrapped.
Check and/or adjust
rigging per Para-
graph 5-40.
SURFACE CONTROLS
ISSUED: 1/18/72
0
1H14